Chapter 4: Management with WebPAM PROe
99
Managing Enclosures
On VessRAID, enclosures include the main VessRAID subsystem or Head Unit
as well as VessJBOD enclosures that are connected through expansion.
Enclosure Management includes the following functions:
• Viewing the Enclosure (page 99)
• Locating an Enclosure (page 99)
• Viewing Enclosure Topology (page 100)
• Viewing Enclosure Information (page 100)
• Making Enclosure Settings (page 101)
• Viewing FRU VPD Information (page 101)
• Checking the Battery (page 102)
• Reconditioning a Battery (page 103)
• Silencing the Buzzer (page 103)
• Making Buzzer Settings (page 103)
• Testing the Buzzer (page 104)
Viewing the Enclosure
To view information about the enclosures:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
The following information is shown:
• Enclosure ID number
• Enclosure Type
• Operational Status
• Status Description (specific components in need of attention, if any)
Locating an Enclosure
To locate an enclosure (subsystem):
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Locate Enclosure button.
The disk status LEDs and the LEDs on the back of the enclosure blink for
one minute. See the Figures below.
To Next Page
Loading...
Need help?
General
