Chapter 5: Management with the CLU
179
The screen displays the following information:
• Controller ID – 1
• Port ID – 1, 2, 3, or 4
• Max Receive Data Segment Length – 8 KB is the default
• Number of Active Sessions – Number of sessions logged into this port
• Primary Header Digest Method – CRC-32
• Primary Data Digest Method – CRC-32
• iSCSI Receive Marker – None
Viewing iSCSI Target Port Statistics
You can see the target port settings, but none of these values are user-adjustable
in the current version of the software.
To view the iSCSI target port settings:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Ports and press Enter.
3. Highlight Target Port 1, Target Port 2, Target Port 3, or Target Port 4 and
press Enter.
4. Highlight MAC Layer Statistics, IP Layer Statistics, or TCP Layer Statistics
and press Enter.
The screen displays statistics for the layer you chose.
Viewing the iSCSI Portal
An iSCSI Portal is an iSCSI data port.
To view the iSCSI portals:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Portal and press Enter.
The screen displays the following information:
• Portal ID – 0 to 34
• IP Address – IP address of the port
• Associated Type – iSCSI
• IF Name – Port number
• TCP port number – 3260 is the default
To Next Page
Loading...
Need help?
General
