43
Chapter 4: Management with WebPAM PROe
This chapter covers the following topics:
• Logging into WebPAM PROe (page 44)
• Perusing the Interface (page 46)
• Working with the Storage Network (page 51)
• Working with Subsystems (page 52)
• Managing Users (page 62)
• Managing the Network Connection (page 67)
• Managing iSCSI Connections (page 69)
• Managing Storage Services (page 76)
• Managing Software Services (page 79)
• Exporting the User Database (page 87)
• Importing a User Database (page 87)
• Importing a Configuration Script (page 88)
• Updating the Firmware (page 89)
• Viewing Flash Image Information (page 89)
• Restoring Factory Defaults (page 90)
• Clearing Statistics (page 90)
• Shutting Down the Subsystem (page 91)
• Starting Up After Shutdown (page 93)
• Restarting the Subsystem (page 94)
• Managing the Controller (page 95)
• Managing Enclosures (page 99)
• Managing Physical Drives (page 105)
• Managing UPS Units (page 111)
• Managing Disk Arrays (page 114)
• Managing Logical Drives (page 127)
• Managing Spare Drives (page 133)
• Working with the Logical Drive Summary (page 137)
For information about VessRAID’s audible alarm and LEDs, see “Chapter 9:
Troubleshooting” on page 277.
To Next Page
Loading...
Need help?
General
