Chapter 4: Management with WebPAM PROe
101
2. Click the Enclosures icon.
3. Click the Enclosure icon.
Enclosure information appears the Information tab in Management View. You
can monitor power supplies, fans, enclosure temperatures and voltages, and
the battery.
Adjustable items
You can set or adjust the following items:
• Enclosure Warning and Critical temperature thresholds
• Controller Warning and Critical temperature thresholds
See “Making Enclosure Settings” on page 101.
For information on Enclosure problems, see “Chapter 9: Troubleshooting” on
page 277.
Making Enclosure Settings
To make Enclosure settings:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Enclosure icon.
4. Click the Settings tab in Management View.
5. Enter a value in the following fields as necessary:
• Enclosure Warning Temperature Threshold
• Enclosure Critical Temperature Threshold
• Controller Warning Temperature Threshold
• Controller Critical Temperature Threshold
6. Click the Submit button.
The changes take effect immediately.
Viewing FRU VPD Information
FRU VPD refers to Vital Product Data (VPD) information about Field Replaceable
Units (FRU) in the enclosure. The screen lists the battery backup unit (optional)
and backplane.
To view FRU VPD information:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
To Next Page
Loading...
Need help?
General
