Chapter 4: Management with WebPAM PROe
47
There are four major parts to the graphic user interface:
• Header (see below)
• Tree (see page 47)
• Management View (see page 48)
• Event Frame (see page 49)
Using the Header
The Header contains the following items:
• Language – To change languages, see “Selecting a Language” on page 45.
• View – To view the Event Frame, see “Viewing the Event Frame” on
page 49.
• Storage Network – To view all of the VessRAID subsystem enclosures
currently accessible the network, see “Working with the Storage Network” on
page 51.
• Contact Us – Click Contact Us for a list of contact information, including
Technical Support. Also see “Contacting Technical Support” on page 319.
• Logout – To log out of WebPAM PROe, see page 49.
• Help – Click Help in the Header to access the main online help menu.
• About – Click About in the Header to display the WebPAM PROe software
version and build date.
Using Tree View
Tree View enables you to navigate around all components of the Subsystem,
including iSCSI management, network and service management, RAID
controller, enclosure, physical drives, disk arrays, logical drives, and spare
drives. The figure below shows the components of Tree View.
To Next Page
Loading...
Need help?
General
