VessRAID 1000i Series Product Manual
188
Working with LUN Mapping
LUN Mapping includes the following functions:
• Viewing a List of Initiators (page 188)
• Enabling LUN Mapping (page 188)
• Creating an Initiator (page 188)
• Mapping a LUN to an Initiator (page 189)
• Deleting an Initiator (page 189)
Viewing a List of Initiators
LUN Mapping must be enabled in order for VessRAID to recognize an iSCSI
initiator.
To view a list of initiators:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
A list of the current initiators appears.
Enabling LUN Mapping
To enable LUN mapping:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
A list of the current iSCSI initiators appears.
LUN Mapping must be enabled in order for VessRAID to recognize the initiator. If
LUN Mapping is currently disabled, highlight Enable LUN Mapping and press
Enter.
Creating an Initiator
You must add an initiator to the VessRAID’s initiator list in order to use the
initiator to create a LUN.
To create (add) a new initiator:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight Create New Initiator and press Enter.
To Next Page
Loading...
Need help?
General
