VessRAID 1000i Series Product Manual
60
Viewing Lock Status
The lock prevents other sessions (including by the same user) from making a
configuration change to the controller until the lock expires or a forced unlock is
done.
To view the lock status for this subsystem:
1. Click the Subsystem icon Tree View.
2. Click the Lock tab in Management View.
The following information is displayed:
• Lock Status – The User who set (owns) the current lock.
• Expiration Time – Amount of time left until the lock automatically
releases.
• Expire At Time – The date and time when the lock will automatically
release.
Setting the Lock
The lock prevents other sessions (including by the same user) from making a
configuration change to the controller until the lock expires or a forced unlock is
done.
You can set the lock to last from one minute to one day. To set the lock for this
subsystem:
1. Click the Subsystem icon Tree View.
2. Click the Lock tab in Management View.
3. Click the Lock option.
4. Enter a time interval between 1 and 1440 minutes (one day) that you want
the lock to stay active.
5. Click the Submit button.
Renewing the Lock
The lock prevents other sessions (including by the same user) from making a
configuration change to the controller until the lock expires or a forced unlock is
done.
Renewing the lock extends the period of time the controller remains locked. To
renew an existing lock for this subsystem:
1. Click the Subsystem icon Tree View.
2. Click the Lock tab in Management View.
3. Click the Renew option.
To Next Page
Loading...