139
Chapter 5: Management with the CLU
This chapter covers the following topics:
• Initial Connection (page 140)
• Running Quick Setup (page 144)
• Managing the Subsystem (page 145)
• Managing the Controller (page 147)
• Managing the Enclosure (page 150)
• Managing Physical Drives (page 155)
• Managing Disk Arrays (page 158)
• Managing Spare Drives (page 169)
• Managing Logical Drives (page 172)
• Managing the Network Connection (page 175)
• Managing iSCSI Connections (page 177)
• Managing Background Activity (page 184)
• Working with the Event Viewer (page 186)
• Working with LUN Mapping (page 188)
• Managing UPS Units (page 190)
• Managing Users (page 193)
• Working with Software Management (page 196)
• Flashing through TFTP (page 202)
• Viewing Flash Image Information (page 202)
• Clearing Statistics (page 202)
• Restoring Factory Defaults (page 203)
• Shutting Down the Subsystem (page 204)
• Starting Up After Shutdown (page 206)
• Restarting the Subsystem (page 207)
• Making Buzzer Settings (page 209)
For information about VessRAID’s audible alarm and LEDs, see “Chapter 9:
Troubleshooting” on page 277.
To Next Page
Loading...
Need help?
General
