VessRAID 1000i Series Product Manual
196
Working with Software Management
Software Management includes the following functions:
• Making Email Settings (page 196)
• Making SLP Settings (page 197)
• Making Web Server Settings (page 197)
• Making Telnet Settings (page 198)
• Making SNMP Settings (page 198)
• Managing SNMP Trap Sinks (page 199)
• Making Netsend Settings (page 200)
• Managing Netsend Recipients (page 200)
Making Email Settings
By default, Email service is set to Automatic and its normal status is Started.
To make Email service settings:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight Software Management and press Enter.
3. Highlight Email and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic
and Manual.
5. Highlight the following and press the backspace key to erase the current
value, then type the new value:
• Server IP address
• Server Port number (25 is the default)
6. Highlight Authentication and press the spacebar to toggle between Yes and
No.
If you selected Yes, type in a User name and Password in the fields
provided.
7. The following items are optional but recommended. Highlight and press the
backspace key to erase the current value, then type the new value:
• Sender’s email address
• Subject Line for the email message
8. Press Ctrl-A to save your settings.
To start, stop or restart the Email service, highlight Start, Stop or Restart and
press Enter.
To Next Page
Loading...
Need help?
General
