VessRAID 1000i Series Product Manual
82
2. Click OK in the confirmation box.
Starting or Restarting Web Server service
To start or restart the Web Server service, click the Start or Restart button.
Making Telnet Settings
VessRAID’s Telnet service enables you to access VessRAID’s Command Line
Interface (CLI) through a network connection. To make Telnet settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Telnet Setting link in Management View.
4. Enter the Telnet Port number.
2300 is the default.
5. Enter the Maximum Number of Connections.
4 is the default.
6. Enter the Session Time Out interval.
24 minutes is the default.
7. Click the Submit button.
8. Click OK in the confirmation box to restart the Telnet service with your
changes.
Changing the Startup Setting
1. Under Startup Type:
• Click the Automatic option to start the service automatically during
system startup. Recommended.
• Click the Manual option to start the service manually (the service does
not start during system startup).
2. Click the Submit button.
Stopping Telnet service
To stop the Telnet service:
1. Click the Stop button.
2. Click OK in the confirmation box.
To Next Page
Loading...
Need help?
General
