Chapter 5: Management with the CLU
189
4. Type the name of the initiator.
An iSCSI initiator name is the iSCSI name of the initiator device and is
composed of a single text string.
Obtain the initiator name from the initiator utility on your host system.
Note that the initiator name you input must match exactly in order for the
connection to work.
5. Press Ctrl-A to save the initiator.
Mapping a LUN to an Initiator
You must add an initiator to the VessRAID’s initiator list in order to use the
initiator to create a LUN. See “Creating an Initiator” on page 188.
To map a LUN to an initiator:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight an existing Initiator and press Enter.
A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value, then
type the LUN you want to assign to this initiator, from 0 to 255.
If you make a error, press Ctrl-R to restore the current LUN.
5. Press Ctrl-A to save the LUN map.
Deleting an Initiator
To delete an initiator:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight the initiator you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
4. Highlight Delete Marked Initiators and press Enter.
5. Press Y to confirm the deletion.
Note
LUN Mapping must be enabled in order for VessRAID to
recognize the initiator.
To Next Page
Loading...
Need help?
General
