Promise Technology VessRAID 1720i User Manual

Managing the Network Connection
215
Automatic IP Settings
To make Management Port settings automatically:
1. Press the or button until the display says Management Port.
2. Press the button and the display says Link Status Up.
If it says Link Status Down, reconnect to the network before preceding.
3. Press the or button and the display says DHCP Disable.
4. Press the button to make a change.
5. Press the button to Enable.
6. Press the button to confirm.
The display shows the new IP address set by the DHCP server.

Promise Technology VessRAID 1720i Specifications

General

Brand	Promise Technology
Model	VessRAID 1720i
Category	Enclosure
Language	English