Promise Technology VessRAID 1720i User Manual

VessRAID 1000i Series Product Manual
38
Figure 6. The Array Configuration menu
Automatic
When you choose the Automatic option, the following parameters appear on the
screen:
• Disk Arrays – The number of physical drives in the disk array, their ID
numbers, configurable capacity, and the number of logical drives to be
created
• Logical Drives – The ID number of the logical drives, their RAID level,
capacity, and stripe size
• Spare Drives – The physical drive ID number of the dedicated hot spare
assigned to this disk array
If you have both Hard Disk Drives (HDD) and Solid State Drives (SSD), separate
disk array and logical drive sets will be created for your HDDs and for your SSDs.
These two drive types cannot be mixed in the same disk array.
If you accept these parameters, click the Submit button. The new disk array
appears in the Disk Array List on the Information tab.
If you do NOT accept these parameters, use the Express (page 39) or Advanced
(page 40) option to create your disk array.

Promise Technology VessRAID 1720i Specifications

General

Brand	Promise Technology
Model	VessRAID 1720i
Category	Enclosure
Language	English