4. Click Add Wi-Fi.
The Connect to a Wi-Fi network window opens.
5. Configure connection settings.
Setting Description
Network Name Enter the name of the wireless network.
Security Type Select the encryption used by the wireless network.
• No Authentication (Open):Any wireless device
can connect to the network. This is the default
setting.
• WEP: Use Wired Equivalent Privacy (WEP) if the
wireless device does not support WPA or WPA2.
• WPA- Personal: Use Wi-Fi Protected Access
(WPA)- Personal as an intermediate security
measure if the wireless device does not support
WPA2.
• WPA2-Personal: Uses Advanced Security
Encryption (AES) for data encryption. This is the
suggested security mechanism if the wireless
device supports WPA2.
• WPA- & WPA2- Enterprise: Use this security
mechanism if the wireless device supports
transition from WPA-Enterprise to WPA2-
Enterprise. The network automatically chooses
the encryption method used by the wireless
device.
Password Enter the password provided by the network
administrator.
Tip
Click to make the password visible.
Automatically connect when the Automatically connect to this network whenever it is
in range.
Connect even if hidden Attempt to connect to this network even if the SSID
is hidden.
6. Optional: Configure WPA- & WPA2 Enterprise settings.
QTS 4.5.x User Guide
Network & Virtual Switch 421
To Next Page
Loading...
Need help?
General
