Scanner Service Mode
D117/D118 3-504 SM Appendix
3.10 SCANNER SERVICE MODE
3.10.1 SCANNER SERVICE MODE
SP1-xxx (System and Others)
1001 [Scan Nv Version]
1001-005
- *CTL
Operates automatic initialization to ensure that scanner NV is initialized if
necessary. To do this SP, specify the version of scanner NV within 9
characters.
“Function name”_”Machine code”_”Serial number”
- Function name: Enter “3”.
- Machine code: Enter the machine code with three characters.
- Serial number: Enter the number (default: 001).
1005 [Erase margin(Remote scan)]
1005-001
Range from 0 to 5 mm *CTL
[0 to 5 / 0 / 1 mm/step]
Creates an erase margin for all edges of the scanned image.
If the machine has scanned the edge of the original, create a margin. This
SP is activated only when the machine uses TWAIN scanning.
1009 [Remote scan disable]
1009-001
0:enable 1:desable *CTL
[0 or 1 / 0 / - ]
Enable or disable remote scan.
1010 [Non Display ClearLight PDF]
1010-001
0:Display 1:Nondisplay *CTL
[0 or 1 / 0 / - ]
Display or nondislay ClearLight PDF function.
To Next Page
Loading...
Need help?
General
