Main SP Tables-2
D117/D118 3-130 SM Appendix
2494
[Thick1:Size-Env.Correct:FC]
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size.
003 PaperTransfer:1Side:S1 *ENG [1 to 100 / 25 / 1/step]
004 PaperTransfer:2Side:S1 *ENG [1 to 100 / 22 / 1/step]
007 PaperTransfer:1Side:S2 *ENG [1 to 100 / 33 / 1/step]
008 PaperTransfer:2Side:S2 *ENG [1 to 100 / 50 / 1/step]
011 PaperTransfer:1Side:S3 *ENG [1 to 100 / 27 / 1/step]
012 PaperTransfer:2Side:S3 *ENG [1 to 100 / 38 / 1/step]
015 PaperTransfer:1Side:S4 *ENG [1 to 100 / 17 / 1/step]
016 PaperTransfer:2Side:S4 *ENG [1 to 100 / 72 / 1/step]
2495
[Thick1:LeadingEdgeCorrection]
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode.
003 Paper Transfer:1side *ENG
[0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2496
[Thick1:SwitchTimingLeadEdge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
To Next Page
Loading...
Need help?
General
