Main SP Tables-5
D117/D118 3-308 SM Appendix
004 Cancellation Time *CTL
Determines the length of time that the
system waits
for correct input of the user ID and
password after a lockout has
occurred. This setting is used only if
SP5413-3 is set to "1" (on).
[1 to 9999 / 60 / 1min./step]
5414 [Access Mitigation]
001 Mitigation On/Off *CTL
Switches on/off masking of
continuously used IDs and passwords
that are identical.
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
002 Mitigation Time *CTL
Sets the length of time for excluding
continuous access for identical user
IDs and passwords.
[0 to 60 / 15 / 1min./step]
5415 [Password Attack]
001 Permissible Number *CTL
Sets the number of attempts to attack
the system with random passwords to
gain illegal access to the system.
[0 to 100 / 30 / 1attempt/step]
002 Detect Time *CTL
Sets the time limit to stop a password
attack once such an attack has been
detected.
[1 to 10 / 5 / 1sec./step]
To Next Page
Loading...
Need help?
General
