Type C305
(D649)
 After you turn the machine on, if you see a message that tells you the SRAM has
been formatted due to a problem with SRAM, turn the machine off and on again to
clear the message.
21. Enter the "User Tools" mode and set date and time.
22. Do SP3102-000 in the fax SP mode and enter the serial number for the fax unit.
23. Enter the correct country code with SP2103-001 (NCU Country/ Area Code Setting).
24. Exit the SP mode, and turn the machine off and on.
1.1.3 FAX ICON ADDITION
This procedure allows the fax icon to appear on the home screen of the operation panel.
1. Press [User Tools].
2. Press [Edit Home].
3. Press [Add Icon].
To Next Page
Loading...
Need help?
General
