Firmware Update
D117/D118 5-22 SM
Recovery after Power Loss
If the ROM update is interrupted as a result of accidental loss of power while the firmware is
updating, then the correct operation of the machine cannot be guaranteed after the machine is
switched on again. If the ROM update does not complete successfully for any reason, then in
order to ensure the correct operation of the machine, the ROM update error will continue to show
until the ROM is updated successfully.
In this case, insert the card again and switch on the machine to continue the firmware download
automatically from the card without the menu display.
5.5.4 BROWSER UNIT UPDATE PROCEDURE
1. Remove the slot cover [A] for the SD card (
x 1).
To Next Page
Loading...
Need help?
General
