Main SP Tables-5
SM Appendix 3-341 D117/D118
CERT:Up ID *CTL [- / - / -]
The ID of the request for certification.
083
Firm Up Status *CTL
[0 to 5 / 0 / 1/step]
0: waiting for receiving firmware
update.
1: waiting for scheduling firmware
update start.
2: waiting for user confirmation
3: preparing for device firmware
update.
4: processing device firmware
update.
5: termination processing
Displays the status of the firmware update
085
Firm Up User Check *CTL [- / - / -]
This SP setting determines if the operator can confirm the previous version of
the firmware before the firmware update execution. If the option to confirm the
previous version is selected, a notification is sent to the system manager and
the firmware update is done with the firmware files from the URL.
086
Firmware Size *CTL [- / - / -]
Allows the service technician to confirm the size of the firmware data files
during the firmware update execution.
087
CERT:Macro Ver. CTL [8digits / - / 1digit/step]
Displays the macro version of the @Remote certification. This SP displays
8-digit characters.
088
CERT:PAC Ver. CTL [16digits / - / 1digit/step]
Displays the PAC version of the @Remote certification.
This SP displays 16-digit characters.
To Next Page
Loading...
Need help?
General
