SP Mode
Tables
2615
[Special3:LeadingEdgeCorrection]
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode.
001
Paper
Transfer:standard:1side
*ENG
[0 to 995 / 100 / 5%/step]
002
Paper
Transfer:standard:2side
*ENG
003 Paper Transfer:Low:1side *ENG
004 Paper Transfer:Low:2side *ENG
005
Separation
DC:standard:1side
*ENG
006
Separation
DC:standard:2side
*ENG
007 Separation DC:Low:1side *ENG
008 Separation DC:Low:2side *ENG
2616
[Special3:SwitchTimingLeadEdge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
001
Paper
Transfer:standard:1side
*ENG
[0 to 50 / 0 / 2mm/step]
002
Paper
Transfer:standard:2side
*ENG
003 Paper Transfer:Low:1side *ENG
004 Paper Transfer:Low:2side *ENG
005
Separation
DC:standard:1side
*ENG