Main SP Tables-5
D117/D118 3-336 SM Appendix
004
Operation *CTL [up to 20 / - / 1digit/step]
Use this to input the telephone number of your sales agency. Enter the
number and press #.
5816 [Remote Service]
001
I/F Setting *CTL
[0 to 2 / 2 / 1/step]
0: Remote service off
1: CSS remote service on
2: NRS remote service on
Selects the remote service setting.
002
CE Call *CTL
[0 or 1 / 0 / 1/step]
0: Start of the service
1: End of the service
Performs the CE Call at the start or end of the service.
NOTE: This SP is activated only when SP 5816-001 is set to “2”.
003
Function Flag *CTL
[0 or 1 / 0 / 1/step]
0: Disabled, 1: Enabled
Enables or disables the remote service function.
007
SSL Disable *CTL
[0 or 1 / 0 / 1/step]
0: Yes. SSL not used.
1: No. SSL used.
Controls if RCG (Remote Communication Gate) confirmation is done by SSL
during an RCG send for the @Remote over a network interface.
008
RCG Connect Timeout *CTL [1 to 90 / 30 / 1second/step]
Sets the length of time (seconds) for the time-out when the RCG (Remote
Communication Gate) connects during a call via the @Remote network.
To Next Page
Loading...
Need help?
General
