Main SP Tables-3
D117/D118 3-228 SM Appendix
3555 [Execution Interval]
001
Charge AC Control
Counter
*ENG [0 to 2000 / 500 / 1page/step]
3600 [Select ProCon]
001 Potential Control *ENG
Sets the potential control mode.
[0 or 1 / 1:CONTROL / 1/step]
0:FIXED, 1:CONTROL
002 LD Control *ENG
Sets the LD control mode.
[0 or 1 / 1:ON / 1/step]
0:OFF, 1:ON
003 TC Adj. Mode *ENG
Sets the execution timing for toner
density adjustment process control.
[0 to 2 / 1 / 1/step]
0:Do Not Execute
1:1st Power On
2:1st Power On & Job End
004 ACC Before ProCon *ENG
Selects the performance same as the
process control executed before ACC.
[0 to 2 / 2 / 1/step]
0:Not Execute
1:Process Control
2:TC Control
006 Pattern Cal. Method *ENG
[0 to 2 / 2 / 1/step]
0:FIXED
1:INITIALIZED
2:CALCULATED
To Next Page
Loading...
Need help?
General
