SP Mode
Tables
2576
[Special1:SwitchTimingLeadEdge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
001 PaperTransfer:Standard:1side *ENG
[0 to 50 / 0 / 2mm/step]
002 PaperTransfer:Standard:2side *ENG
003 Paper Transfer:Low:1side *ENG
004 Paper Transfer:Low:2side *ENG
005
Separation
DC:Standard:1side
*ENG
006
Separation
DC:Standard:2side
*ENG
007 Separation DC:Low:1side *ENG
008 Separation DC:Low:2side *ENG
2577
[Special1:TrailEdgeCorrection]
Adjusts the correction coefficient to the paper transfer roller current for the paper
trailing edge in each mode.
001 PaperTransfer:Standard:1Side *ENG
[0 to 995 / 100 / 5%/step]
002 PaperTransfer:Standard:2Side *ENG
003 Paper Transfer:Low:1side *ENG
004 Paper Transfer:Low:2side *ENG
005 Separation DC:Standard:1side *ENG
006 Separation DC:Standard:2side *ENG
007 Separation DC:Low:1side *ENG
008 Separation DC:Low:2side *ENG