SC Tables
D117/D118 6-70 SM
6.1.11 SC9XX: OTHERS
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
920 CTL Printer error
-00 B No response at PM start up
-01 B Timeout error during the PM operation
-02 B Working memory error
-03 B Cannot start-up the filtering process
-04 B Abnormal exit from the filtering process
An error is detected in the printer application program.
 Defective software
 Unexpected hardware resource (e.g., memory shortage)
Software defective:
Turn the main power switch off and on. If the problem is not solved,
change the controller firmware.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
921 CTL
Printer font error
A necessary font is not found in the SD card.
 A necessary font is not found in the SD card.
 The SD card data is corrupted.
1. Check that the SD card has the correct data.
-00 B Resident font is not found.
-01 B Option font is not found.
To Next Page
Loading...
Need help?
General
