Main SP Tables-5
D117/D118 3-366 SM Appendix
5845
[Delivery Server Setting]
Provides items for delivery server settings.
001
FTP Port No. *CTL [1 to 65535 / 3670 / 1/step]
Sets the FTP port number used when image files to the Scan Router Server.
002
IP Address (Primary) *CTL
[000.000.000.000 to 255.255.255.255
/ - / 1/step]
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be referenced by the initial system setting.
006
Delivery Error Display Time *CTL [0 to 999 / 300 / 1sec/step]
Use this setting to determine the length of time the prompt message is
displayed when a test error occurs during document transfer with the NetFile
application and an external device.
008
IP Address (Secondary) *CTL
[000.000.000.000 to 255.255.255.255
/ - / 1/step]
Specifies the IP address assigned to the computer designated to function as
the secondary delivery server of Scan Router. This SP allows only the setting
of the IP address without reference to the DNS setting.
009
Delivery Server Model *CTL
[0 to 4/ 0 / 1/step]
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
Allows changing the model of the delivery server registered by the I/O device.
To Next Page
Loading...
Need help?
General
