Main SP Tables-2
D117/D118 3-142 SM Appendix
2554
[OHP:Size-Env.Correct:FC]
Adjusts the size correction coefficient table for the paper transfer roller current
for each paper size.
003 PaperTransfer:S1 *ENG [1 to 100 / 49 / 1/step]
007 PaperTransfer:S2 *ENG
[1 to 100 / 12 / 1/step]
011 PaperTransfer:S3 *ENG
015 PaperTransfer:S4 *ENG
2555
[OHP:LeadingEdgeCorrection]
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode.
003 Paper Transfer *ENG
[0 to 995 /100 / 5%/step]
007 Separation DC *ENG
2556
[OHP:SwitchTimingLeadEdge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
003 Paper Transfer *ENG
[0 to 50 / 0 / 2mm/step]
007 Separation DC *ENG
2557
[OHP:TrailEdgeCorrection]
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode.
003 Paper Transfer *ENG
[0 to 995 / 100 / 5%/step]
007 Separation DC *ENG
To Next Page
Loading...
Need help?
General
