SP Mode
Tables
2558
[OHP:SwitchTimingTrailEdge]
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode.
003 Paper Transfer *ENG
[0 to 50 / 0 / 2mm/step]
007 Separation DC *ENG
2559 [OHP:EnvCorrectionTable]
015 Separation DC *ENG [1 to 100 / 30 / 1/step]
2559 [OHP:EdgeEnvCorrection]
019 Separation DC *ENG [1 to 100 / 30 / 1/step]
2561
[Special1:Bias]
Adjusts the DC voltage of the discharge plate for special paper 1.
Standard: 260 mm/sec, Low: 85 mm/sec
001
Separation
DC:standard:1side
*ENG
[0 to 4000 / 2000 / 10-V/step]
002
Separation
DC:standard:2side
*ENG
003 Separation DC:low:1side *ENG
004 Separation DC:low:2side *ENG
2563
[Special1:Bias:BW]
Adjusts the current for the paper transfer roller for special paper 1 in
black-and-white mode.
001 PaperTransfer:standard:1side *ENG [0 to 200 / 12 / 1-uA/step]
002 PaperTransfer:standard:2side *ENG [0 to 200 / 10 / 1-uA/step]
003 PaperTransfer:low:1side *ENG [0 to 200 / 9 / 1-uA/step]
004 PaperTransfer:low:2side *ENG [0 to 200 / 11 / 1-uA/step]
To Next Page
Loading...
Need help?
General
