Bit Switches
SM 73 D649
Fax Option
Type C305
(D649)
System Switch 1D (SP No. 1-101-030)
No Function Comments
0
RTI/CSI/CPS code display
0: Enable
1: Disable
0: RTI, CSI, CPS codes are displayed on the
top line of the LCD panel during
communication.
1: Codes are switched off (no display)
1-7 Not used Do not change these settings.
System Switch 1E (SP No. 1-101-031)
No Function Comments
0
Communication after the
Journal data storage area has
become full
0: Impossible
1: Possible
0: When this switch is on and the journal
history becomes full, the next report prints. If
the journal history is not deleted, the next
transmission cannot be received. This prevents
overwriting communication records before the
machine can print them.
1: If the buffer memory of the communication
records for the Journal is full, fax
communications are still possible. But the
machine will overwrite the oldest
communication records.
 This setting is effective only when
Automatic Journal printout is enabled
but the machine cannot print the report
(e.g., no paper).
To Next Page
Loading...
Need help?
General
