Main SP Tables-2
D117/D118 3-132 SM Appendix
2501
[Thick2:Bias]
Adjusts the DC voltage of the discharge plate for thick 2 paper.
003 Separation DC:1side *ENG
[0 to 4000 / 0 / 10-V/step]
004 Separation DC:2side *ENG
2503
[Thick2:Bias:BW
Adjusts the current for the paper transfer roller for thick 2 paper in
black-and-white mode.
Middle: 182 mm/sec, Low: 85 mm/sec
003 PaperTransfer:1side *ENG [0 to 200 / 24 / 1-uA/step]
004 PaperTransfer:2side *ENG [0 to 200 / 18 / 1-uA/step]
2507
[Thick2:Bias:FC]
Adjusts the current for the paper transfer roller for thick 2 paper in full color
mode.
Middle: 182 mm/sec, Low: 85 mm/sec
003 PaperTransfer:1side *ENG [0 to 200 / 26 / 1-uA/step]
004 PaperTransfer:2side *ENG [0 to 200 / 21 / 1-uA/step]
2511
[Thick2:SizeCorrection:BW]
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size.
003 PaperTransfer:1Side:S1 *ENG
[100 to 995 / 100 / 5%/step]
004 PaperTransfer:2Side:S1 *ENG
007 PaperTransfer:1Side:S2 *ENG [100 to 995 / 167 / 5%/step]
008 PaperTransfer:2Side:S2 *ENG [100 to 995 / 160 / 5%/step]
011 PaperTransfer:1Side:S3 *ENG [100 to 995 / 233 / 5%/step]
To Next Page
Loading...
Need help?
General
