ng
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
524 D
Transport motor error
The machine detects a High signal from a transport motor lock
detection for 2 seconds after the transport motor turned on.
 Unit overload
 Defective motor
1. Replace the unit.
2. Replace the motor.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
525 B
Transport motor error: bank 1
The machine detects a Lock signal from a bank 1 transport motor after
the motor turned on.
526 B
Transport motor error: bank 2
The machine detects a Lock signal from a bank 2 transport motor after
the motor turned on.
 Motor overload
 Defective motor
 Disconnected connectors
 Broken harness
1. Turn off and on the main power switch.
2. Check or connect the connectors.
3. Replace the harness.
4. Replace the motor.
To Next Page
Loading...
Need help?
General
