EasyManuals Logo

Ricoh GR-C1 User Manual

Ricoh GR-C1
1207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #419 background imageLoading...
Page #419 background image
SC Tables
D117/D118 6-58 SM
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
863 CTL
HDD: Read error
The data written to the HDD cannot be read normally, due to bad
sectors generated during operation.
Note:
-01 to -23 indicate the type of partition where the error occurred. Enable
display of these numbers with SP7902.
ï‚§ HDD defective
Note:
If the bad sectors are generated at the image partition, the bad sector
information is written to NVRAM, and the next time the HDD is
accessed, these bad sectors will not be accessed for read/write
operation.
1. Turn the main power switch off and on.
2. Replace the HDD.
-01 D The error occurred at an area which does not belong to a partition.
-02 D The error occurred at partition a.
-03 D The error occurred at partition b.
-04 D The error occurred at partition c.
-05 D The error occurred at partition d.
-06 D The error occurred at partition e.
-07 D The error occurred at partition f.
-08 D The error occurred at partition g.
-09 D The error occurred at partition h.
-10 D The error occurred at partition i.
-11 D The error occurred at partition j.
-12 D The error occurred at partition k.
-13 D The error occurred at partition l.

Table of Contents

Other manuals for Ricoh GR-C1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh GR-C1 and is the answer not in the manual?

Ricoh GR-C1 Specifications

General IconGeneral
BrandRicoh
ModelGR-C1
CategoryAll in One Printer
LanguageEnglish

Related product manuals