Main SP Tables-5
D117/D118 3-370 SM Appendix
041
Fill Addr Acl Info *CTL
[- / - / -]
[Execute]
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
address book from the NVRAM and writes it onto the new HDD. However, the
new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD
automatically.
5. However, at this point the address book can be accessed by only the
system administrator or key operator.
6. Enter the SP mode and do SP5846-041. After this SP executes
successfully, any user can access the address book.
043
Addr Book Media *CTL
[0 to 30 / 4 /1/step]
0: Unconfirmed
1: SD Slot 1
2: SD Slot 2
4: USB Flash ROM
20: HDD
30: Nothing
Displays the slot number where an address book data is in.
047
Initialize Local Address
Book
*CTL
[- / - / -]
[Execute]
Clears the local address book information, including the user code.
To Next Page
Loading...
Need help?
General
