Main SP Tables-8
D117/D118 3-438 SM Appendix
Abbreviation What it means
Svr Server
TonEnd Toner End
TonSave Toner Save
TXJob Send, Transmission
YMC Yellow, Magenta, Cyan
YMCK Yellow, Magenta, Cyan, Black
 All of the Group 8 SPs are reset with SP5 801 1 Memory All Clear.
8 001
T:Total Jobs *CTL
These SPs count the number of times each
application is used to do a job.
[0 to 9999999/ - / 1]
Note: The L: counter is the total number of
times the other applications are used to send
a job to the document server, plus the
number of times a file already on the
document server is used.
8 002 C:Total Jobs *CTL
8 003 F:Total Jobs *CTL
8 004 P:Total Jobs *CTL
8 005 S:Total Jobs *CTL
8 006 L:Total Jobs *CTL
 These SPs reveal the number of times an application is used, not the number of pages
processed.
 When an application is opened for image input or output, this counts as one job.
 Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
 Only jobs executed by the customer are counted. Jobs executed by the customer engineer
using the SP modes are not counted.
 When using secure printing (when a password is required to start the print job), the job is
counted at the time when either "Delete Data" or "Specify Output" is specified.
 A job is counted as a fax job when the job is stored for sending.
 When a fax is received to fax memory, the F: counter increments but the L: counter does not
(the document server is not used).
 A fax broadcast counts as one job for the F: counter (the fax destinations in the broadcast are
To Next Page
Loading...
Need help?
General
