Printer Service Mode
SM Appendix 3-495 D117/D118
Appendix:
SP Mode
Tables
1001 Bit Switch
004 Bit Switch 4 0 1
bit 0
to 5
DFU
-
-
bit 6
[PCL. PS. PDF]: Changes the paper
direction used with the settings "Any
Size/Type" or "Any Custom Size/Type".
0: LEF 1: SEF
By default "Any Size/Type" and "Any Custom Size/Type" treat all paper in
the by-pass tray as if it were loaded in the SEF direction.
This bit switch changes the assumed direction to LEF.
bit 7
DFU
- -
1001 Bit Switch
005 Bit Switch 5 0 1
bit 0
DFU
- -
bit 1
Multiple copies if a paper size or type
mismatch occurs
0: Disable
(Single
copy)
1: Enable
(Multiple
copy)
If a paper size or type mismatch occurs during the printing of multiple
copies, only a single copy is output by default. Using this bit switch, the
device can be configured to print all copies even if a paper mismatch
occurs.
bit 2
Prevent SDK applications from altering
the contents of a job.
0: Disable 1: Enable
Enable: SDK applications will not be able to alter print data. This is
achieved by preventing SDK applications from accessing a module called
the "GPS Filter".
Note: The main purpose of this bit switch is for troubleshooting the effects
of SDK applications on data.
bit 3
[PS] PS Criteria
0: Pattern3 1: Pattern1
To Next Page
Loading...
Need help?
General
