Rohde & Schwarz FSVA - Page 303

Instrument Functions
R&S
®
FSVA/FSV
303Operating Manual 1176.7510.02 ─ 09
Remote command:
CALCulate<n>:MARKer<m>:MINimum[:PEAK] on page 669
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK] on page 623
Next Min
Sets the active marker/delta marker to the next minimum of the selected trace.
Remote command:
CALCulate<n>:MARKer<m>:MINimum:NEXT on page 671
CALCulate<n>:DELTamarker<m>:MINimum:NEXT on page 624
Auto Max Peak/Auto Min Peak
Adds an automatic peak search action for marker 1 at the end of each particular
sweep. This function may be used during adjustments of a device under test to keep
track of the current peak marker position and level.
The current marker search limit settings (Left Limit, Right Limit, Threshold softkeys) are
taken into account.
Remote command:
CALCulate<n>:MARKer<m>:MAXimum:AUTO on page 667
CALCulate<n>:MARKer<m>:MINimum:AUTO on page 670
Search Limits
Opens a submenu to set the limits for maximum or minimum search in the x and y
direction.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe] on page 674
Left Limit ← Search Limits
Opens an edit dialog box to enter a value for the lower limit (left vertical line: S1 for
span > 0; T1 for zero span). The search is performed between the lines of the left and
right limit (see also Right Limit softkey).
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits:LEFT on page 674
Right Limit ← Search Limits
Opens an edit dialog box to enter a value for the upper limit (left vertical line: S2 for
span > 0; T2 for zero span). The search is performed between the lines of the left and
right limit (see also Left Limit softkey). If no value is set, the upper limit corresponds to
the stop frequency.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits:RIGHT on page 675
Threshold ← Search Limits
Opens an edit dialog box to define the threshold line. The threshold line represents the
lower level limit for a "Peak" search and the upper level limit for a "Min" search.
Remote command:
CALCulate<n>:THReshold:STATe on page 742
CALCulate<n>:THReshold on page 741
Measurement Functions