EasyManua.ls Logo

Rohde & Schwarz SMBV100A - Page 391

Rohde & Schwarz SMBV100A
911 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instrument Function
R&S
®
SMBV100A
376Operating Manual 1176.8016.02 ─ 17
This enables the R&S SMBV to be synchronized with the device under test or other
external devices.
The parameter Actual Trigger Delay displays the delay converted in time.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal<ch>]:DELay on page 659
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:TDELay on page 660
Actual Trigger Delay
Displays the time (in seconds) an external trigger event or a trigger event form the
other path is delayed by.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:RDELay? on page 660
Trigger Inhibit
(available on external triggering)
Sets the duration for inhibiting a new trigger event subsequent to triggering. The input
is to be expressed in symbols.
In the "Retrigger" mode every trigger signal causes signal generation to restart. This
restart is inhibited for the specified number of samples.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal<ch>]:INHibit on page 660
Marker Mode
Provides the settings necessary to define the marker output signal for synchronizing
external instruments.
Marker x
Marker configuration for up to 4 marker channels. The settings are used to select the
marker mode defining the shape and periodicity of the markers. The contents of the
dialog change with the selected marker mode; the settings are self-explanatory.
All regular marker signals are described in "Marker Modes" on page 336.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:MODE on page 661
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:PULSe:DIVider on page 663
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:PATTern on page 663
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:OFFTime on page 662
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:ONTime on page 663
Marker x Delay
Defines the delay between the marker signal at the marker outputs relative to the sig-
nal generation start.
"Marker x"
For the corresponding marker, sets the delay as a number of sym-
bols.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:DELay on page 657
Baseband Signal - Baseband Block

Table of Contents

Other manuals for Rohde & Schwarz SMBV100A

Related product manuals