Ops 7–8 • Keying Vision Operator’s Manual (v12.0 MD)
This completes the procedure for setting up a Self Key. Once set up, the key can be taken on-air
using the transition button on the Keyers Module, or using the Transition Module.
For More Information...
• on setting up your preview monitors to view your key, refer to the section “Video
Preview” on page Ops 4-14.
• on performing transitions, refer to the section “Performing Transitions” on page Ops
5-12.
• on working with Squeeze & Tease MD, refer to the section “Flying Keys” on page Ops
12-10.
To Next Page
Loading...
