Ops 7–10 • Keying Vision Operator’s Manual (v12.0 MD)
• MASK
• FLY KEY (Squeeze & Tease MD only)
• BORD ON (XFX Dual Border Generator only)
This completes the procedure for setting up an Auto Select Key. Once set up, the key can be taken
on-air using the transition button on the Keyers Module, or using the Transition Module.
For More Information...
• on setting up your preview monitors to view your key, refer to the section “Video
Preview” on page Ops 4-14.
• on performing transitions, refer to the section “Performing Transitions” on page Ops
5-12.
• on working with Squeeze & Tease MD, refer to the section “Flying Keys” on page Ops
12-10.
To Next Page
Loading...
