Vision Operator’s Manual (v12.0 MD) Peripheral Control • Ops 10–9
Use the following procedure to cue a clip using the Remote Control Menu:
1. Navigate to the Remote Control Menu as follows:
• Press HOME B Effects B More B Remote Ctrl Select.
2. Press VTR Control on the Remote Control Select Menu.
3. Use the BNC knob on the Remote Control Select Menu to select the Video Server you
want to cue a clip for.
4. Press GO!! on the Remote Control Select Menu.
Video Server Remote Control — Remote Control Menu 1-2
5. Use the Clip knob on the Remote Control Menu 1-2 to select the Clip Register you
want to cue. You can play or preview the clip manually using the transport controls on
the menu.
6. Press Cue Clip on the Remote Control Menu 1-2 to cue the selected clip. The clip is
now ready to be played using the ROLL CLIP button.
This completes the procedure for cueing a clip using the Remote Control Menu.
To Next Page
Loading...
