Ops 10–16 • Peripheral Control Vision Operator’s Manual (v12.0 MD)
Use the following procedure to store and recall shots for the selected camera:
1. Press Store/Recall on the Camera Head Control Menu.
Recall Shot — Camera Shotbox
2. Store a shot as follows:
• Toggle Mode on the Camera Shotbox Menu to Store.
•Use the Shot knob on the Camera Shotbox Menu to select the location that you
want to store your shot to. You can also select the Shot X button directly on the
menu, where X is the number of the shot location you want to store the shot to.
• Press Perform Store on the Camera Shotbox Menu to store the shot.
3. Recall a shot as follows:
• Toggle Mode on the Camera Shotbox Menu to Recall.
•Use the Speed knob on the Camera Shotbox Menu to select the amount of time
for the recall to be performed.
• Select the Shot X button you want to recall the shot from, where X is the number of
the shot location you want to recall the shot from.
• Press Perform Recall on the Camera Shotbox Menu to recall the shot. You can
also double-press the Shot X button to recall the shot immediately.
This completes the procedure for storing and recalling shots for the selected camera.
To Next Page
Loading...
