Vision Operator’s Manual (v12.0 MD) Position/Crop Functions • Ops 13–5
Pivot Position — S&T MD Position/Crop Menu 1-2
•Use the X Location knob on the S&T MD Position/Crop Menu 1-2, or the
positioner, to move the pivot point along the X-Axis.
•Use the Y Location knob on the S&T MD Position/Crop Menu 1-2, or the
positioner, to move the pivot point along the Y-Axis.
•Use the Z Location knob on the S&T MD Position/Crop Menu 1-2, or the
positioner, to move the pivot point along the Z-Axis.
This completes the procedure for selecting a Point of Rotation for a channel.
To Next Page
Loading...
