Vision Operator’s Manual (v12.0 MD) WARP Effects • Ops 17–21
5. Adjust the shape of the effect as follows:
• Press Shape on the S&T WARP Menu.
Obscure (Shape) — S&T WARP Menu
•Use the Aspect knob on the S&T WARP Menu, or the positioner, to adjust the
aspect ratio of the obscure shape.
•Use the Shape knob on the S&T WARP Menu to select the shape of the obscure.
6. Apply effects to the Obscure as follows:
• Press Effects on the S&T WARP Menu.
Obscure (Effects) — S&T WARP Menu
•Use the Background knob on the S&T WARP Menu to select whether the key
video outside of the obscure is shown (Show), or hidden (Hide).
•Use the Edge Effect knob on the S&T WARP Menu to turn the edge effect On or
Off. The Edge Effect adds an embossing effect to the edge of the obscure.
•Use the Angle (deg.) knob on the S&T WARP Menu, or the positioner, to select
the rotation of the embossing effect around the obscure.
This completes the procedure for setting up an Obscure WARP.
To Next Page
Loading...
