Ross Vision - Page 335

Vision Operator’s Manual (v12.0 MD) Appendix A: Pre-loaded Effects • Ops 18–3
32 DiveUp Rotate Back and Up
33 DiveDn Rotate Back and Down
34 WalkDown Move Back, then Walk the video Down
35 WalkUp Move Back, then Walk the video Up
36 AspectX Compress Horizontally to Knife Edge and Back
37 AspectY Compress Vertically to Knife Edge and Back
38 ZoomOut Push Forward, then Back
39 ZoomIn Push Away, then Back
40 DfocusRt Defocus, then Push Right
41 DfocusLt Defocus, then Push Left
42 MosaicLt Mosaic, then Push Left
43 MosaicRt Mosaic, then Push Right
44 TwirlLft Twirl around the Y-Axis, then Push Left
45 TwirlRt Twirl around the Y-Axis, then Push Right
46 KnifEdge Twirl to Knife Edge
47 Tornado Video gets stuck in a Tornado
48 SpinOut Spin and Push Forwards, then Back
49 SpinIn Spin and Push Away, then Back
50 TopLtUp Pivot Point at Top Left Corner, Rotate and Push Down, then Back
51 TopLtDn Pivot Point at Top Left Corner, Rotate and Push Up, then Back
52 TopRtUp Pivot Point at Top Right Corner, Rotate and Push Up, then Back
53 TopRtDn Pivot Point at Top Right Corner, Rotate and Push Down, then Back
54 BtmLtUp Pivot Point at Bottom Left Corner, Rotate and Push Up, then Back
55 BtmLtDn Pivot Point at Bottom Left Corner, Rotate and Push Down, then Back
56 BtmRtUp Pivot Point at Bottom Right Corner, Rotate and Push Up, then Back
57 BtmRtDn Pivot Point at Bottom Right Corner, Rotate and Push Down, then Back
58 10000lbs Falls, then Bounces (when run in reverse)
59 NailFall Swings on Nail Point, then Falls Down
60 SpinLtUp Pivot on Left Center, then Up
61 SpinLtDn Pivot on Left Center, then Down
62 SpinRtUp Pivot on Right Center, then Up
63 SpinRtDn Pivot on Right Center, then Down
64 SpinUpLt Pivot on Top, then Left
65 SpinUpRt Pivot on Top, then Right
66 SpinDnLt Pivot on Bottom, then Left
Table 18.1 Squeeze & Tease MD Wipes and Sequences
Number Name Description