Vision Operator’s Manual (v12.0 MD) Switcher Basics • Ops 4–27
• Bus Proc Amp — Select this option to perform a bus-based color correction. The
MLE and bus that is displayed on the menu is used. The Proc Amp Bus Mode
Menu is displayed.
Operating Tip — You can revert the color correction back to the default settings by pressing
the Default button on the Proc Amp Menu.
3. Adjust the Gain as follows
• Press Gain on the Proc Amp Menu.
Gain Settings — Proc Amp Menu
•Use the Gain knob on the Proc Amp Menu to adjust the luminance and
chrominance gain simultaneously. The Lum, Cr, and Cb graphs update to reflect
your selection.
•Use the Chroma Gain knob on the Proc Amp Menu to adjust just the
chrominance gain. The Cr and Cb graphs update to reflect your selection.
•Use the Lum Gain knob on the Proc Amp Menu to adjust just the luminance gain.
The Lum graph updates to reflect your selection.
4. Adjust the Cr as follows:
• Press Cr Adjust on the Proc Amp Menu.
Cr Adjustment — Proc Amp Menu
•Use the Cr Gain knob on the Proc Amp Menu to adjust the gain of the Cr. The Cr
graphs update to reflect your selection.
•Use the Cr Offset knob on the Proc Amp Menu to adjust the offset of the Cr. The
Cr graphs update to reflect your selection.
5. Adjust the Cb as follows:
• Press Cb Adjust on the Proc Amp Menu.
To Next Page
Loading...
