Ops 4–40 • Switcher Basics Vision Operator’s Manual (v12.0 MD)
2. Use the Destination MLE knob on the Copy MLE Menu to select the MLE, or MLEs,
that you want to copy to.
Note — You cannot have the same Destination MLE and Source MLE selected to perform an
MLE Copy.
3. Use the Source MLE knob on the Copy MLE Menu to select the MLE that you want
to copy from.
4. Press Copy on the Copy MLE Menu to perform the copy.
This completes the procedure for copying the contents of one Panel Row to another.
To Next Page
Loading...
