197
• Use Dialing Prefix
An optional prefix that may be needed to
dial the above phone number. For in-
stance, you may need to enter a 9 to get
an outside line or a string of numbers for a
long-distance access code. You may need
to change this prefix when using the unit
at different locations (such as your office,
home, or hotel).
• User Phone Number
Your phone number, if you want it to
appear with the messages you send.
• Private Logo
A personalized logo, if you want it to
appear with the paper and fax messages
you send. To use a private logo, you must
register it with AT&T
®
for an additional
cost. (Refer to your AT&T Mail Welcome
Kit for more information about logos.)
• File Transfer
The type of file transfer protocol that you
need to use with your modem. The default
is FMODEM. If you are having trouble
sending and receiving messages (such as
when connecting via a cellular phone), try
using XMODEM or YMODEM.
3.
Touch the Modem Setup tab, and enter the
following information. If using a Sharp CE-
FM4 Fax/Modem, touch Restore to use the
default settings. You may need to change this
information when using a PC card modem,
particularly the modem string. For other
modems, refer to the manual that came with
your modem for this information.
To Next Page
Loading...
Need help?
General
