Engineering via SICAM TOOLBOX II
SICAM RTUs, User Manual SICAM CMIC 129
DC8-001-2.09, Edition 08.2016
The details for operation can be found in the CAEx plus Online Help, chapter "Target System
Connection", section "Functions for Target System Connection".
Note
With user program running, the simulated value of a variable is statically overwritten. In contrast to this,
inputs/outputs are not statically overwritten, rather only with a change to their process image (edge-
triggered).
With user program stopped, simulated values are retained.
To Next Page
Loading...
Need help?
General
