Siemens SICAM CMIC - Installation of the Device

Installation
SICAM RTUs, User Manual SICAM CMIC 29
DC8-001-2.09, Edition 08.2016
1.3.6 Installation of the Device
SICAM CMIC can be installed on the DIN rail by hand, without any tools.
Hang the inclined device in the top
edge of the DIN rail.
Swing the device until the locking
hook has contact with the bottom
edge of the DIN rail.
Push the casing to the back. As a
result the locking hook opens
briefly and the casing engages in
the rail.
1
2
3