Service
282 SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
The following signals can be defined by means of parameter as process event and/or process
alarm (refer to 5.1.9.2.1, Configurable Logging and Display of Signal States):
Type of signal Designation Type identifier
(TI)
Process
event
Process
alarm
Single point information SI TI 30
ü ü
Double point information DI TI 31
ü ü
Single command SC TI 45
ü
Double command DC TI 46
ü
The following diagnosis events and diagnosis alarms (sum errors) are generated by the de-
vice and entered in the list. These diagnosis events cannot be parameterized:
Event process text Meaning Diagno-
sis event
Diagno-
sis alarm
Dia IntError Internal error
ü ü
Dia ExtError External error
ü ü
Dia ComError Communication error
ü ü
Dia Test Test
ü ü
Dia Warning Warning
ü ü
Dia BoardFail Board failure
ü ü
Dia Restart Restart
ü ü
6.1.2.4.1 Events | ALL Events
The submenu Events is devided in the
submenues
• All Events
• DEF Events (process events)
• DIA Events (diagnosis events)
To Next Page
Loading...
Need help?
General
